How to Remove Kitchen Faucet Without Basin Wrench

In a typical family, the kitchen faucet is turned at least 40 times every day. What makes this a big deal? As you should already know, the kitchen faucet is an essential part of the kitchen, which is one of the areas with the highest activities at home. You wash kitchenware, rinse fruits and vegetables, and even fill containers at the kitchen faucet.

Kitchen faucets come in various designs and models today. If you’re going to buy or repair one, it is important to identify your specific need. There are certain factors that we recommend you consider when you are upgrading or installing a new faucet.

Though this article is generally most beneficial to homeowners, other relevant industries can also refer to it. This content explains and provides more knowledge about the importance of a kitchen faucet, a guide to removing it, as well as advice and other options if you have a tough time getting it right.

Your home or establishment may already have a kitchen faucet. You could also be considering an upgrade on the current one or installing a new one. Whichever the case may be, this article is meant for you.

What is a Kitchen Faucet and What Makes It Important?

Pixabay.com

Have you been thinking about how to go about uninstalling a kitchen faucet? If the thought has crossed your mind because you need to do it now or in the future, that is splendid! This article has got you covered.

First of all, let us look into what a kitchen faucet is and its use and benefits to you.

Pinterest.com

Certain parts are commonly found in all kinds of kitchen faucets. These include:

  1. Aerator:– To regulate the flow and splash of water.
  2. Body:- To enable the movement of hot and cold water through the spout.
  3. Handle:– Used to open and close the valve.
  4. Spout:-Passes water out of the body to the sink.
  5. Supply/Source:-Connects the cold water pipes to hot water pipes and vice versa.
  6. Valve Controller:– Controls the water rate and regulates temperature.

In every kitchen, especially the sink area, the kitchen faucet is a vital component. Kitchen faucets come at different prices according to their material, design, and finish. Of all the fittings that go in a kitchen area, it is one of the easiest. However, if you don’t think you have what it takes to get this task done yourself, you can employ an expert. If you are going to get it done yourself, it is important to become familiar with its parts.

READ  How to Make Oak Kitchen Cabinets Look Modern

The role of a kitchen faucet is very important and significant. It is an essential component of every functional home. Resources are spent by other sectors and industries to have these faucets fitted in their establishments. The significance of kitchen faucets is evident in the following areas:

  • Kitchen faucets make washing, rinsing, and cleaning chores more convenient. It is also useful for some laundry items. An example of this is the provision of sprayer hoses in some faucet models.
  • Kitchen faucets are available in different sizes, designs, and purposes. There is a wide range of components and features to choose from according to your specific need.
  • Kitchen faucets are a basic tool that makes it easier to carry out kitchen tasks with less stress. They provide very valuable assistance as you carry out your kitchen sink chores.

How to Remove Kitchen Faucet Without Basin Wrench

How to Remove Kitchen Faucet Without Basin Wrench
Pinterest.com

This section will teach you how to uninstall a kitchen faucet. If you’re going to upgrade or generally use your kitchen faucet system, this is the kind of information you need.

#1. Turn Off or Stop the Water Flow

You have to stop the water flow in your kitchen sink. There are two different valves for cold water and hot water. Shut both valves from the location of the valve points which connects the water supply and pipes. If there are no valves or the valves do not work, then you can find the switch valve close to the water meter and turn it off.

#2. Check the Water Flow

Be sure to check and confirm that you have stopped the water from both the cold water and hot water faucets. There must be no water flow from the faucet as soon as you turn it off.

#3. Introduce a Container to Catch Overflowing Water

You need to place a bowl, pan, or bucket under your valve to prevent the overflow of the excess water out of the supply tubes in the system. The hot water and cold water tubes should be disconnected from each other from both valves that lead to the faucet. Separate them while holding them in place.

#4. Take Out the Mounted Faucet from the Sink

The technique you use in removing your faucet depends on the faucet design. This part is the most difficult because it may require the use of another tool, the basin wrench to reach the attaching nuts and detach them. The faucet can be removed from above. It may take some extra effort to work through the seal but it is not an impossible task.

READ  How to Paint Tile Backsplash

#5. Tidy Up the Sink Area

Use a non-scratch pad to clean up the sink area from which you removed the faucet.

What Do You Do In The Absence Of a Basin Wrench?

We have guided you on the basic process to remove kitchen faucets. For situations that may arise, we will also teach you how to remove kitchen faucets when a basin wrench is not available.

There are different types and sizes of basin wrenches for different tasks. However, in the absence of this tool, you might be wondering what else you can use. No cause for alarm because it is definitely easier to get a collection of alternative materials to basin wrench.

  • Cable Fastener or Zip-Tie

There are a lot of things you can do with cable fasteners or zip-ties. Sometimes, they can be an alternative to basin wrenches.

Attach one of the bolts to the nut you intend to loosen. Tinker with it until there is obviously a tight grip between the nut and the head of the bolt.

Attach the second nut as well, so that both bolts are joined together. Make sure they are joined tightly in the required direction. That’s about it.

  • Duct Tape

There is hardly any situation in which duct tape isn’t useful. However, you may still be surprised that it is also useful in loosening bolts.

Tear the first stripe which is about 12 inches long. Next, tear the second stripe, so you would be having two stripes of 12-inch duct tape.

Join the sticky side of one strip to the non-sticky side of the other to get a strong tape stripe. Then use the stripe to wrap the connecting nuts. Leave about 6 to 8 inches length of tail out.

Make it stick to the nut by pressing it firmly. The nut can be removed easily by pulling the tail of the duct tape in the direction that loosens it.

  • Two Coins

You can do more with money than only buying.

Place two big coins on either side of the nut. Get a strong grip on the coins by holding them between the knuckles of your index and middle fingers. Proceed to loosen the nut by twisting in the required direction.

Final Thoughts

How to Remove Kitchen Faucet Without Basin Wrench
diynetwork.com

That is all the information you need concerning the use of your kitchen faucet. The next step in the journey is to put the new knowledge to use. There is no way home can function with no kitchen. In the same way, no kitchen can function in the absence of a suitable kitchen faucet. Digest what you have learned in this article and maximize your kitchen time, whether at home or away.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.