Dyson Animal vacuum is a highly favored choice for a large number of people when it comes to cleaning homes. It is extensively used to clean carpets as well as other types of residential flooring. If you have pets at your home, you may have to deal with a lot of hair. This vacuum is the best choice available to clean pet hair.
Any type of vacuuming can be done effectively using Dyson Animal. With frequent usage over a period, the suction efficiency of the equipment deteriorates.
You may also find the device emanating an unpleasant smell. That is when you need to clean the vacuum cyclone component.
How to clean your Dyson Animal vacuum cyclone component easily and fast?
Follow these easy and simple steps to clean your Dyson Animal vacuum effectively and restore optimal suction power:
Step 1
First of all, you need to remove the clear bin as well as the cyclone component from the vacuum. You don’t need to hire any professional help to remove the bin and cyclone component.
It is a simple process that can be done with effortless ease. You can do it exactly like emptying the dirt bin of your vacuum.
Step 2
Before moving on to the next step, you have to confirm that the dirt bin vacuum is empty. Once you make sure that the canister bin of the vacuum is empty, you can unfasten it from the upper cyclone component to make the cleaning process easy, fast, and effective.
Step 3
The next step is to take a large sink. Then, the main cyclone component must be placed in the bin. You have to run lukewarm water over the component. For rinsing all sections of filtering holes effectively, you should keep on spinning the unit.
This method of approach makes sure that each section of the hole is cleaned completely. When the water leaving the sink is crystal clear, you can stop the spinning process.
Step 4
Water needs to be sprayed into the main hole at one end of the unit after pulling it towards you. You should continue this process for a few seconds.
Then, water must be poured out. You need to repeat the same procedure with all wholes until the water runs clear. This step removes most types of debris and dirt from the holes.
Step 5
Some stubborn impurities may remain inside the wholes even after spraying water. For ensuring that the cyclone component is 100% clean, you need to pour water inside the main hole.
The water level should be sufficient enough to fill the whole cyclone. The large hole needs to be covered with one hand to prevent water from leaving the unit. You have to shake the cyclone in a gentle way to help water clean all remaining stubborn debris and dust.
Remove the dirty water and pour clean water into the hole again. Keep on repeating the same procedure until the water runs clear. This step eliminates even the most stubborn dirt and debris from the cyclone compartment to help a Dyson Animal vacuum regain its optimal suction power.
Why Clean Your Dyson Animal Vacuum Cyclone Component?
Most prominent reasons that result in reduced suction or suction loss
- Lack of frequent cyclone component or filter cleaning
- Filter damage
- Duct blockage/damage
- Split-in hoses or seals
- Belt or motor issues
The most common reason for reduced suction is the lack of filter cleaning. If you cannot restore the suction ability of a Dyson Animal vacuum by following the cleaning methods advocated above, you should replace the filters. Cleaning or filter replacement restores suction under normal circumstances.
If these methods do not deliver the expected results and still show signs of reduced suction, you have to examine the ducting for damage or blockage. Other common reasons for the suction loss are split-in hoses or seals and belt or motor issues.
No matter whether you are using an advanced cordless stick vacuum or a conventional canister vacuum, cleaning is imperative to maintain operational efficiency at optimal levels. To retain the suction power of a Dyson Animal Vacuum for a long period, you need to clean the cyclone component frequently.
The cyclone component is the one that delivers the much-needed suction power. Proper cleaning also helps you get rid of bad odors. Last but not the least; you can expect a longer shelf life if you clean the major components frequently.
More from Materialsix.com: